45
your specific needs. Also included is the FOXPRO theme which is built
with FOXPRO company colors (orange/black). This theme is very good
for night hunting.
Changing Themes:
1. Access the Display/Power menu and select “Theme.”
2. Use the scroll buttons to cycle through the available themes.
3. When set to the desired theme, push “Play/Select” to lock it in.
7-4 Display Timeout
After being idle for an established period, the on-screen display will go
blank. The Fusion remote will not power off completely during display
timeout (see Auto Off) and is still completely usable. When the screen
completes a timeout cycle, the screen can be reactivated by pushing
any button on the keypad. There are five different time settings that
you can use for configuring the display timeout: 5 seconds, 15 seconds,
30 seconds, 1 minute, 2 minutes, and 5 minutes.
This feature is also useful in helping to preserve and maximize your
battery life. By having the screen shut off when idle, the load on the
batteries is reduced, which equates to improved run times of your
batteries.
Configuring Display Timeout:
1. Access the Display/Power menu and select “Disp Timeout.”
2. Use the scroll buttons to cycle through the available time spans.
3. When set to the desired time, push “Play/Select” to lock it in.
When your display times-out, you can push the power button a single
time to wake it back up to ensure that no functions are initiated. For
example, if you were to use a preset button or mute button in attempt
to wake the remote up, you will be performing the function of that
To Next Page
Loading...
