25
display may appear according to how the MUTE / Pause
control has been applied. See the FOXFUSION section for
more information.
• VOL: Volume level indicator. Ranges 0 – 40.
• BATT: Battery level indicator.
• TIME(R): Displays either stand timer or real-time clock. When
an alarm is indicated, the background will blink red.
4-5 Accessing Fusion Remote Configuration Menu
From the sounds screen, push the “Back/Menu” button a single time.
There are a total of five elements that will appear on this menu: FOX
FEATURES, Sound Settings, Display/Power, Date/Time(r), and TX1000
Settings.
4-6 Verifying Channel of Operation
Prior to attempting remote controlled operation, it is important that
you first verify that both the Fusion and Fusion remote are set to
operate on the same channel. If the two devices are not on the same
channel, then radio communication will not be possible.
Fusion Channel of Operation:
1. Turn on the Fusion.
2. Simultaneously depress the Sound Up and Sound Down selector
buttons a single time. The screen on the Fusion should display a
“c” on the left side of the segment followed by the numeric
value indicating the current channel selection (see the image
above denoting channel 5).
3. You can change the channel of operation by pushing the Sound
Up or Sound Down arrow button to cycle through the values (0-
15). This value must always match the radio channel setting in
the remote control.
To Next Page
Loading...
