Foxpro FUSION - Download List

50
9-2 Download List
Any time you reprogram the Fusion digital game call to add new sounds
or new FOXCAST sequence files, you must download a new copy of the
play list to the Fusion remote. This menu item will guide you through
that process. The entire programming process is covered in more detail
later in the manual.
9-3 AUX
The auxiliary jack operation specifications can be changed for either
momentary or latched. All FOXPRO Jack Predator Decoys require that
the jack be setup for momentary. Some third-party decoys may require
latched operation as opposed to momentary. A detailed list of other
products and their specific requirements is not maintained by FOXPRO.
You will need to check with the equipment manufacturer to determine
if it is compatible and what the requirements are.
Configuring the Auxiliary Setting:
1. Access the TX1000 Settings menu and select “AUX”.
2. Cycle through the two options using the scroll buttons.
3. When the appropriate setting is selected, push the “Play/Select”
button to lock it in.
9-4 View
The Fusion remote control can display your sounds either by general
listing or by category listing. Sound categories are the best route to go
if you have many sounds.
Configuring Sounds View:
1. Access the TX1000 Settings menu and select “View”.
2. Cycle through the two options using the scroll buttons.
3. When the appropriate setting is selected, push the “Play/Select”
button to lock it in.