34
FOXBANG being turned off when activated. This can be used to help eliminate
false FOXBANG activations when in the field.
Setting the Sensitivity:
1. Access the FOX FEATURES menu on the Fusion remote and
locate FOXBANG.
2. Select FOXBANG Sen. and use the scroll buttons to cycle through
the available sensitivity options.
3. When the sensitivity level has been set, push “Play/Select” to
lock it in.
The FOXBANG sensor is located inside of the Fusion remote. For it to
detect the gunshot, the remote needs to be relatively close to the
firearm (within 5 feet). It is assumed that most hunters will have the
remote on a lanyard around their neck.
An unintended and unavoidable consequence of adjusting the
FOXBANG sensitivity to the highest level is that handling noises, such as
the banging of the transmitter case on your firearm stock, may cause
unexpected activation of FOXBANG. For this reason, you should choose
the lowest sensitivity that affords reliable activation from the muzzle
blast. FOXBANG is intended to work when the transmitter is located
within about 5 feet of the firearm muzzle.
Before using FOXBANG in the field, head out to your local shooting
range and test the different sensitivity levels to find the one best suited
to your firearm.
5-4 FOXPITCH
FOXPITCH enables you to modify the pitch of a sound being played to
make it sound higher or lower than the original recording to effectively
transform the sound into something different. This feature can be
useful in areas that you frequently call for predators. If a particular
sound has netted you a good bit of success, like Lightning Jack, for
To Next Page
Loading...
