30
IMPORTANT NOTE
• No matter what FOX FEATURE you have engaged, if you change
the primary sound from one sound to another, it will
automatically disengage the active FOX FEATURE. FOX
FEATURES will work with some other modes of operation such
as Jukebox Mode and FOXCAST, but as soon as you switch to a
different sound, that feature will be turned off.
5-1 FOXFUSION
FOXFUSION allows you to fuse (combine) two individual sounds while
operating your Fusion. When you play a sound normally, as described in
chapter 4, you access your sound or category list, pick the sound, and
push “Play/Select”. This sound that you pick is your main or primary
sound. The secondary sound (or FOXFUSION sound) is picked
separately from a similar sound or category list called “FOXFUSION
Sounds”. To access the “FOXFUSION Sounds” list, push the FOXFUSION
button on the right side of the remote control.
Both sounds will have their own unique properties such as volume level
and they can both be muted independently or together. The
FOXFUSION button on the remote allows you to switch back and forth
between the primary and FOXFUSION sound.
To Fuse Two Sounds:
1. Turn on the Fusion and Fusion remote.
2. Select a sound and volume like normal—this is the primary
sound.
3. Push the “FOXFUSION” button on the right side of the Fusion
remote. The screen title changes to “FOXFUSION Sounds”.
4. Select the FOXFUSION sound in the same manner you would the
primary sound and then push “Play/Select” to initiate playback.
Both sounds should now be playing.
To Next Page
Loading...
