26
4. When the proper channel is selected, simultaneously push the
Sound Up and Sound Down arrow buttons to lock in the setting
and return to the sound selection mode.
Fusion Remote Channel of Operation:
1. Turn on the Fusion remote.
2. Access the main menu and select the “TX1000 Settings” menu
item.
3. “Radio Channel” will be the first option. The channel will be
shown to the right of the text. This needs to be the same value
that is set for the Fusion.
4. To change the channel, highlight “Radio Channel” and then push
the “Play/Select” button. Then use the scroll buttons to cycle
through the available channels (0-15).
5. When the proper channel is selected, push the “Play/Select”
button to lock it in.
4-7 Playing Sounds with the Remote
The first operation that most users want to perform is playing sounds.
There are multiple methods in which you can initiate sound playback.
Before attempting to play sounds, be sure that the Fusion and Fusion
remote both have fresh batteries installed and that both devices are
powered-on.
There are two sound view mode options within the Fusion remote;
Sound List and Categories. This is configured through the TX1000
Settings item in the main menu. The method of playing a sound is
identical for both modes; the way the sounds are displayed on the
screen is the only difference. By default, the Fusion remote is setup to
display the sounds by categories.
To change how the sounds are displayed, access the TX1000 Settings
menu and locate the menu item titled “View”. Highlight “View” and the
To Next Page
Loading...
