72
volume, low volume, battery life, etc. Being prepared and ensuring
proper functionality before heading out on a trip can help you decide if
you need new batteries, if it needs service, or if everything is working
well. This can help prevent cancellation of trips and potential
disappointment.
14. Troubleshooting
This section will cover the troubleshooting aspects for the Fusion and
Fusion remote control. The most common problems are battery
related. Before doing anything else, try installing fresh batteries. When
your batteries get low, in either the Fusion or the Fusion remote,
unexpected operations can occur. You can experience such things as
loss of audio quality, loss of remote-control range, and other abnormal
results.
Problem: Fusion will Not Turn On Solution: Make sure that you have
fresh batteries installed. If you are using rechargeable batteries, make
sure they are fully charged. Inspect your battery tray and make sure the
springs are not compressed or corroded as this could lead to poor
battery connectivity. Also check all positive contacts on the tray for
signs of corrosion.
Problem: Fusion does not produce any sound Solution: Check that the
speakers are not turned off in the Fusion remote control. Check to see if
you can play sounds manually (without the remote). If you cannot play
sounds manually, connect the Fusion to a computer and inspect the
sound files for missing files or signs of corruption.
Problem: Fusion remote not being recognized by computer Solution:
When connecting the Fusion remote to your computer, make sure that
the device is turned off. Try a different USB port on the computer or
using a different USB cable.
To Next Page
Loading...
