16
Using the scroll buttons on the Fusion remote, highlight the category
you wish to pick a sound from, and then push the “Play/Select” button.
The sounds assigned to that category will now be displayed. Use the
scroll buttons to highlight a sound that you wish to play, and then push
the “Play/Select” button to begin playback. You then must use the
volume up button to raise the volume level to your desired setting.
To mute the sound, simply push the “Mute” button. Un-muting is
accomplished by pushing the “Mute” button a second time. You can
quickly change to a different sound by highlighting it on the screen and
then pushing the “Play/Select” button. To quickly go back to the
previous sound, you can push the “Recall” button.
For more detailed information on remote operations and configuration,
please continue to Chapter 4.
2-4 Using Presets/Favorites
The Fusion remote can store up to 50 unique presets or favorites. A
preset is a shortcut to a particular sound which has a defined volume
level. The Fusion remote has 4 quick access preset buttons located on
the top left and right (see image in section 1-4).
By default, your Fusion remote will have no presets established. The
following instructions will describe how to setup a preset:
To Create a Preset/Favorite:
1. From the main screen, select the “Favorites/Presets” menu
item.
2. Select one of the 50 preset slots. Notice that the screen will
indicate “Preset Recording”. The first step is to select the sound.
3. Use the scroll buttons to highlight the sound you want to
establish for this preset and then push the “Play/Select” button.
To Next Page
Loading...
