65
2. Access the main menu on the Fusion remote.
3. Select the “TX1000 Settings” menu.
4. Select the “Download Sound List” item from the menu to initiate
the transfer.
Once the process is complete, you will see an overview on the screen
showing you how many sounds, sequences, and categories have been
detected during the transfer process. Exit the menu and return to your
sound list to review the changes you have made. If there were any
problems during the transfer, the Fusion remote will revert back to the
previous sound list as failsafe.
IMPORTANT NOTE
• Verify that the Fusion and Fusion remote are set to operate on
the same channel prior to updating the sound list. If they are
not on the same channel, you will have difficulty in getting the
list to update.
12. Creating FOXCAST Sequence Files
This section will provide you with detailed information on creating and
installing FOXCAST sequence files in your Fusion digital game caller.
12-1 Creating FOXCAST Sequences Manually
This process requires some basic computer operations experience. If
you are not very experienced with computers, it is recommended that
you seek help prior to performing any of the following steps.
A FOXCAST sequence file is a simple text-based file that contains unique
instructions to guide your Fusion through a stand. These instructions
include commands to change the sound, change the volume level, enter
a passage of silence, and so forth. Here is a list showing all the various
command possibilities:
To Next Page
Loading...
