42
Changing the Primary Mode and Secondary Mode:
1. Access the Sound Settings menu and select either “Pri. Mode” or
“Sec. Mode” (FOXFUSION).
2. Use the scroll buttons to cycle through the available values.
3. When the appropriate setting is displayed, push the
“Play/Select” button to lock it in.
When using FOXCAST mode or presets for playback, these modes will
be overridden.
6-3 Speaker Mode
There are three speaker modes available for you to select from. These
modes affect how sounds are played through the speakers. The modes
are: Stereo, Mono, and Sep Mon (Separate Mono).
By default, the device will be setup for stereo speaker mode. As the
Fusion has a dual speaker setup, a stereo audio file will be split so that
the left channel plays through the left (rear) speaker while the right
channel plays through the right (front) speaker. If you are operating
with FOXFUSION with stereo sounds, the left/right channel distribution
will be the same.
Mono mode results in left/right channels being condensed so that the
same sounds play through all speakers at the same time. If using
FOXFUSION, both sounds will play through both speakers.
Separate mono will mainly affect FOXFUSION. Your primary sound will
only play through the right speakers (regardless of stereo or mono) and
the secondary will only play through the left speakers.
6-4 Right and Left Speaker
This setting allows you to configure whether the speakers play
simultaneously or individually. You can choose to have both operating
at once or one or the other. The right speaker is chained with the front
To Next Page
Loading...
