51
9-5 Temperature Units
The integrated thermometer can display temperature in either Celsius
or Fahrenheit based upon your preference.
Configuring the Temperature Units:
1. Access the TX1000 Settings menu and select “Temp Units”.
2. Cycle through the two options using the scroll buttons.
3. When the appropriate setting is selected, push the “Play/Select”
button to lock it in.
9-6 Barometer Measurement Units
The Fusion remote can display barometric pressure readings in either
inches or millimeters depending upon your preference.
Configuring the Barometer Measurement Units:
1. Access the TX1000 Settings menu and select “Barom Units”.
2. Cycle through the two options using the scroll buttons.
3. When the appropriate setting is selected, push the “Play/Select”
button to lock it in.
9-7 Elevation
Barometric pressure is the reading provided by a barometer in
measuring atmospheric air pressure. The pressure is not constant, but
changes depending upon altitude and weather conditions. To get the
most accurate measurements with your Fusion remote, it is
recommended that you set the elevation value for your location.
Atmospheric pressure is the greatest at sea level as compared to higher
altitudes. To get the best calculation, knowing your approximate
elevation will greatly increase the accuracy.
Setting the Elevation:
1. Access the TX1000 Settings menu and select “Elevation”.
To Next Page
Loading...
