48
The clock can be displayed in either the standard 12-hour format or 24-
hour format (military time).
Configuring Time Format:
1. Access the Date/Time(r) menu and select “Time Format.”
2. Use the scroll buttons to select either 12- or 24-hour time
format.
3. Push “Play/Select” to lock in the setting.
The bottom status line of the Fusion display can show either the current
time or the stand timer. The stand timer will only be displayed if it is
turned on—otherwise, the clock will show the current time.
8-4 Date & Date Format
The Fusion remote will keep track of the current date in order to
properly render moon phases. This needs to be set up when you first
start using the Fusion remote. The Fusion remote control features a
moon phase indicator. To display the correct moon phase, it is
imperative that you enter the correct date. Otherwise, the displayed
information may not be correct.
Setting the Date:
1. Access the Date/Time(r) menu and select “Date.”
2. By default, the first option is the month. Use the scroll buttons
to select the current month and then push the “Play/Select”
button.
3. Next you set the day using the same method described above,
and then push “Play/Select”.
4. Finally, set the year and push “Play/Select” to lock it in.
To Next Page
Loading...
