59
Using your computer, you can easily rename those files to become
something like:
Example 4 Sound Pack File List
100 Raspy Woodpecker
101 Raven Duet
102 Coyote Pair
103 Raccoon Fight
By renaming the files, they will now have an index value to assign their
individual positions within the sound list. When building a FOXCAST
sequence, for example, referencing sound “100” will link to “Raspy
Woodpecker”. While indexing is not required, it can certainly be useful
in many occasions.
11-5 Using the FOXPRO Programming Utility
The FOXPRO Sound Programming Utility has versions available for both
Windows and Mac operating systems. You can find them both at the
following site: https://www.gofoxpro.com/programming
Under the heading “Software Links”, you should see a link for the
Windows and Mac versions. Click on the appropriate link for your
operating system to go to the download page.
Windows users will see that there is both a 32-bit and 64-bit version of
the utility available. The 64-bit version should work fine on most
modern computers. If your computer is a little on the older side, you
will want to use the 32-bit version. To download the installer
(executable .exe file), click on the link corresponding with the correct
version. After doing that, the installer file will be saved to your
computer. You must now open that file to allow the installer to set up
the utility on your computer. We recommend keeping all of the default
options as they are. You will have the ability to create a Desktop icon if
To Next Page
Loading...
