36
Activating AUTO VOLUME:
1. Access the FOX FEATURES menu on the Fusion remote and
locate AUTO VOLUME.
2. Change the value from off to on.
3. After changing to on, push “Play/Select” to lock it in.
When you are operating with Auto Volume engaged, you can still adjust
the volume, but the adjustment that you make is relative only to the
maximum volume that Auto Volume will climb to during its operational
cycle. If you change sounds while AUTO VOLUME is turned on, it will be
automatically turned off.
5-6 User Button
The User button is located on the bottom left side of your Fusion
remote keypad. This button can be assigned a function of your choice
for quick one button access. You can choose from preset 5, theme
change, FOXBANG, FOXMOTION, Auto Volume, time(r) toggle, timer
reset, backlight, or FOXBANG toggle.
Programming the User Button:
1. Access the FOX FEATURES menu on the Fusion remote and
locate USER.
2. Select USER and use the scroll buttons to cycle through the
available options.
3. When the desired option has been set, push “Play/Select” to
lock it in.
If you selected FOXMOTION as your USER button feature, please be
aware that it will toggle the state of FOXMOTION. For example, if
FOXMOTION is turned off when you push the USER button, it will
automatically turn on FOXMOTION and take you straight to the
configuration screen. If you have FOXMOTION on already, it will turn it
off. If you change sounds, FOXMOTION will be turned off.
To Next Page
Loading...
