29
Preset Mute Override within the menu. Preset 5 can be assigned to the
User button (please see chapter 5 for setting up the User button).
Favorites/Presets can be set up two different ways; through your PC or
manually. To review the instructions for creating presets via your home
computer, see chapter 10. To review the instructions for creating
presets manually, just using the Fusion remote, see Chapter 2.
IMPORTANT NOTES
• The Fusion remote control is not intended to operate the caller
at distances shorter than 1 meter (3 feet). If the remote is
located too close to the caller, proper operation cannot be
ensured.
• If you are actively using a FOXFUSION sound, only the primary
sound will display an “M” while muted whereas the Fusion
remote shows “_/M” to indicate the FOXFUSION sound is
muted. If you perform a double-mute to simultaneously mute
both sounds, the Fusion will display an “M” while the remote
shows “M/M”.
5. FOX FEATURES
This section explores all the available FOX FEATURES in-depth to help
you understand how to use them and get the most out of your calling
experience.
It is important to note that some FOX FEATURES are not compatible
with other FOX FEATURES and some remote operations will override
FOX FEATURES when called upon. As a result, there may be times when
you try to perform an operational change with the Fusion remote that
results in a pop-up message asking you if you wish to cancel the current
FOXFEATURE to enable the desired operation.
To Next Page
Loading...
