54
“foxdata.csv” (contains the collected FOXDATA data) and “presets.txt”
(contains the list of presets).
Each of these files can be viewed on most operating systems through
the standard plaintext editor such as notepad. Except for the FOXDATA
file, the other files can be modified for your specific configurations.
10-1 Editing the Presets File
While you can create and edit your presets through this file, it is
recommended that presets be created through the Fusion remote as
described in chapter 2. Open the file titled ‘presets.txt’ to view the
contents. The file should look something like the following:
Example ‘presets.txt’ File
007,31
086,23
090,40
007,07
001,40
066,28
067,40
005,40
003,23
Each line in this file refers to a specific sound number and a volume
level separated by a comma. The first line of the example shown above
indicates sound number 007 established for playback at volume level
31. You can add more presets to the file manually by editing it through
your computer. Once you have it edited to your liking, save the file, and
close it.
To Next Page
Loading...
