35
example, but the animals do not respond to that sound nearly as much
as they did before, FOXPITCH allows you to manipulate that sound to
help make it fresh again.
FOXPITCH has numerous levels of operation. The normal state of a
sound is when FOXPITCH is set to off. When increasing the pitch, the
value will rise from 1 through 9. Lowering goes from -1 through -9. As
you adjust the pitch value, the effect will take place immediately. Note
that if you change the primary sound, FOXPITCH will automatically be
deactivated.
Activating FOXPITCH:
1. Access the FOX FEATURES menu on the Fusion remote and
locate FOXPITCH.
2. Select FOXPITCH and use the scroll buttons to change the value
from “Off” to the desired level.
3. When the pitch adjustment is set, push the “Play/Select” button
to lock it in.
5-5 AUTO VOLUME
Different hunters like to deploy different tactics in the field. For
example, some may get set up and start playing their favorite sound at
a specific volume level until an animal shows up. Others prefer to have
their volume level change frequently. While both methods have been
proven successful, Auto Volume takes care of your volume
manipulation so that you can keep focusing on the action in the field.
When activated, auto volume begins playing your sound at the lowest
volume setting. Over the course of a few minutes, your volume level
will slowly begin to rise. Once it reaches a certain point, the volume will
then begin to modulate up and down automatically.
To Next Page
Loading...
