28
start off at level 0, so you will need to increase the volume using the
volume up button in order to hear it play.
4-8 Volume & Mute Control
The volume can be adjusted by using the “Volume Up” and “Volume
Down” buttons on the keypad mid-operation, prior to selecting a
sound, or even while the caller is muted. Volume ranges from 0
through 40 and the volume is increased in steps. These steps are
configured through the main menu under Sound Settings. The available
stepping values are 1, 2, 3, and 5. By default, the Fusion remote is set
for a volume stepping value of 2. Volume can be controlled
automatically by a feature called Auto Volume.
4-9 Presets / Favorites
You can store up to 50 favorites or presets in your remote control. A
favorite or preset is, essentially, a shortcut to a specific sound number
and volume level. These can be set through the remote control itself or
authored in a text file stored in your remote control. For more
information on setting up presets, see chapter 10.
From the main screen, select the Favorites/Presets option. This will
display all presets available in the remote. They are listed by preset
identification number, name, and volume level. Highlight the one you
wish to play and then push the Play/Select button to activate. The
Fusion will immediately begin playing the established sound at the
predetermined volume level.
The remote also features 4 quick-access preset buttons providing one
button access to a particular sound/volume combination. These are
located on the top left and right sides of your remote control marked
with “P1”, “P2”, “P3” and “P4”. If the Fusion is muted when selecting a
preset, it will remain muted. You can change this configuration with the
To Next Page
Loading...
