20
Connect an external speaker to Your Fusion:
1. Make sure that the Fusion is powered-off before connecting an
external speaker.
2. Connect the plug from the external speaker to either the rear or
front external speaker jack.
3. Turn on the Fusion and begin playing a sound to hear the
external speaker in action.
Disabling the internal speakers:
You can turn off the internal speakers (either rear or front)
independently while still playing audio through rear or front external
speaker jacks. The Fusion features a slide switch for each of the internal
speakers. The switches are labeled “REAR INT” (rear internal) and
“FRONT INT” (front internal). To disable either one of the internal
speakers, simply move the desired switch from the right “on” position
to the left “off” position.
3-3 Auxiliary Device Jack Specifications
The AUX jack is provided primarily for the control of FOXPRO decoys,
and may be suitable for controlling other similar devices. It is NOT
intended for the direct control of motors, flashlights, or other devices
requiring the internal AUX jack circuitry to switch more than 50
milliamps. The jack tip polarity is positive. Do not exceed 15 volts. You
are urged to seek help from a knowledgeable professional before
connecting any unapproved device to the jack. Keep in mind that any
damage to the FOXPRO caller as a result of improper use of the AUX
jack is not covered by the warranty, nor will FOXPRO be liable for
damage to any connected devices.
3-4 Integrated Decoy Wiring Harness
The Fusion features an integrated decoy wiring harness (see image to
the right) for connecting the Fox Jack 4 decoy. Unlike other decoys
To Next Page
Loading...
