19
GENERAL PRECAUTIONS FOR CHARGING
• Disconnect any/all accessory devices that may be attached to
the Fusion prior to charging. This includes external speakers,
auxiliary devices, and USB cables.
• Make sure that the rechargeable battery pack is installed in the
Fusion properly.
• Connect the approved FOXPRO charger to the charger jack on
the Fusion and attach the transformer to the appropriate outlet.
• Never attempt to charge batteries that are not intended to be
recharged! This includes both Zinc Carbon and alkaline cells.
The resulting damage can be serious and will not be covered by
the warranty. For maximum charge efficiency, we recommend
charging your Fusion in temperatures ranging from 40°F to 85°F
(5°C to 30°C).
• Remember that NiMH batteries self-discharge about 1% per day.
• Do not leave charging batteries unattended.
• Remove batteries from the battery when the caller will not be
used for prolonged periods to help prevent deep discharge and
leakage.
• Recharge your batteries periodically—even when not in use—to
prevent deep discharge.
3-2 External Speaker Jacks Specifications
The Fusion features two external speaker jacks labeled “R EXT” and “F
EXT”. These are standard 3.5mm female jacks that can accept a 3.5mm
male plug. When selecting an external speaker to use with the Fusion,
note that FOXPRO recommends the use of a speaker with 8Ω
Impedance.
FOXPRO carries a variety of external speakers that can be used with the
Fusion. You can view the line of speakers online by visiting
www.gofoxpro.com
To Next Page
Loading...
