38
set. FOXDATA will automatically record FOXBANG and FOXGRIP
activations only. All other records are generated by pushing the
FOXDATA button a single time.
Using FOXDATA:
1. At the beginning of a hunt, before you start calling, push and
hold the FOXDATA button for 1-2 seconds. This button is located
on the side of the Fusion remote.
2. Select “Hunt Started”. After selecting this option, FOXDATA
recording begins. To check whether or not FOXDATA is actively
recording, access the FOXDATA menu screen. The title bar will
display “(R) FoxData – Comment” where the (R) is the active
recording indicator.
3. Optionally, select the current weather conditions to further
notate this hunt. The options are listed in a chart below.
4. Proceed forward with your hunt and use the caller just like you
normally would. Each time you wish to create a log entry, push
the FOXDATA button a single time and the current state will be
recorded.
5. After you have completed the hunt, push the FOXDATA button
for 1-2 seconds and select one of the shown options to close the
session with a specific comment reflecting the outcome of the
hunt.
The options for ending a hunt name are outlined below:
1. Successful Call Description: Successfully called in animal, no kill-
shot provided
2. Successful Call/Kill Description: Successfully called in and killed
animal.
3. Shots Fired / Miss Description: Successfully called in, took shot,
missed.
To Next Page
Loading...
