FRAMOS Industrial Depth Camera D400e Series - User Manual
Version 1.6.0
from 2021-10-15 52 of 64
./UpdateFirmware FRAMOS_D415e_r1111_v1_7_0_0.fw_update -noninteractive -sn=6CD146030D2C,
6CD146030D31
To perform firmware update on all cameras:
./UpdateFirmware FRAMOS_D415e_r1111_v1_7_0_0.fw_update -noninteractive -sn=all
9.3 IP Address Conflict
9.3.1 Interactive Mode
If multiple devices with identical IP address were detected during discovery, the tool will display the
warning about IP address conflict when started in interactive mode. In this case, firmware update
procedure can be started only on cameras that are not in conflict. If camera that is in conflict is
selected for firmware update, the procedure will be terminated, as shown on Figure 32.
Figure 31 – IP address conflict
Figure 32 – IP address conflict when selecting all devices
To Next Page
Loading...