FRAMOS D455e - Revision History; Table 37 - Revision History

FRAMOS Industrial Depth Camera D400e Series - User Manual
Version 1.6.0
from 2021-10-15 64 of 64
Revision History
Date
Version
Changes
2020-06-30
1.0.0
Initial version
2020-09-01
1.1.0
Added chapter "Output Trigger Enabled"; Added chapter "User
Output Level"; Added chapter "Syncer Mode"; Updated chapter
"D400e Camera Specific Features"
2020-10-01
1.2.0
Added chapter "Line Debouncer Time"; Updated chapter "D400e
Camera Specific Features"
2021-01-15
1.3.0
Updated chapter "Power Consumption"; Updated chapter “Firmware
Updates”
; Added chapter "Inertial Measurement Unit"; Added
chapter "Physical Interfaces"; Added
chapter "Depth Quality
Specifications"
; Updated chapter "Manage Camera Calibration
Tables"
; Added chapter "FRAMOS Depth Camera D400e Series";
Added chapter "FRAMOS Depth Camera D400e Module Variant";
Added chapter "Mechanical Drawings"
; Updated chapter
"Component Overview"; Added chapter "Troubleshooting"
2021-05-31
1.4.0
Added chapter “Depth Camera Depth Origin Reference”; Updated
chapter “FRAMOS Depth Camera D400e Module Variant”; Updated
chapter "Labels on the Camera"; Updated chapter "Accessories"
2021-07-15
1.5.0
Updated entire document with information related to D455e camera
2021-10-15
1.6.0
Updated chapter "Thermal Control"; Updated chapter “Storage and
Operating Conditions”; Updated chapter “RGB/Stereo
Synchronization”; Updated chapter “Firmware Updates
”; Updated
chapter “Software”
Table 37 – Revision History
NOTE: This document replaces and supersedes the user manual "FRAMOS Industrial Depth
Camera D435e" v1.1.0.