76 RUBY 10 Advanced Features and Functions
5. Select the file and tap the Update button.
Tip: If the file does not display, try flipping over the USB-C flash drive
and reinserting it into the port.
6. After the update, a confirmation message displays. Tap OK and the
system automatically restarts.
Update Using a USB Cable
To update the device using a USB cable:
1. Go to the Freedom Scientific website and download the latest RUBY 10
release file, which has a VHU extension.
2. Insert the USB-A side of the cable into the computer where you
downloaded the VHU file.
3. Insert the USB-C side of the cable into the RUBY 10. File Manager
automatically detects the RUBY 10 file structure.
4. In Windows File Manager, copy the VHU file from the computer into the
DCIM/Updates folder on RUBY 10. The Update Device screen
automatically opens on RUBY 10 when you begin copying, but do not
proceed until the file has copied 100%. Check the file transfer progress
bar to determine the status of the copy.
To Next Page
Loading...
