Frick QUANTUM - Analog Calibration

QUANTUM
™
HD COMPRESSOR CONTROL PANEL
MAINTENANCE
090.040-M (NOV 2016)
Page 65
This table lists the numbers for the drawings that appear on the following pages. The drawings shown here are the latest revision
as of the printing of this manual. These drawings appear here for reference purposes only, and are subject to change without
notice. When installing, or servicing equipment, always refer to the actual drawings that are included with the control panel for
the latest information.
Wiring Diagrams Page Drawing Number
HD Panel Center Assembly 66 - 69 649D5922 Rev. D
RXF With Capacity Slide Transmitter 70 - 75 649D5943 Rev. -
RWFII With Capacity Slide Transmitter 76 – 81 649D5944 Rev. -
RXF / RXB With Capacity Slide Potentiometer 82 – 87 649D5945 Rev. -
RWBII With Capacity Slide Potentiometer 88 – 93 649D5946 Rev. -
RDB 94 - 99 649D5947 Rev. -
PhD for 32 channel Analog Board 100 649D5050 Rev. D
Digital I/O Board 2 101 - 102 649D5948 Rev. -
Analog I/O Board 2 103 – 104 649D5949 Rev. -
Other Drawings Page Drawing Number
DC Power and Communications Harness 105 639D0204 Rev. A
AC I/O Harness for Digital Boards 1 and 2 106 639D0203 Rev. -
Isolater Repeater Module (Isolates Communications Signals) 107 639C0133 Rev. A
Communications Wiring Diagrams 108 N/A
Point-to-Point Field Wiring Diagram 109 N/A
Vyper (up to 565 amps) to Q5 HD Wiring Connections Contact Frick Service 649D6002 Rev. -
Vyper (over 565 amps) to Q5 HD Wiring Connections Contact Frick Service 649D6003 Rev. -
Enhancer to Q5 HD Wiring Connections Contact Frick Service 649D6004 Rev. -
090.040-TB0015.indd
Table 15. Quantum HD Drawings List
SECTION 9
-
QUANTUM
™
HD DRAWINGS
QUANTUM
™
HD DRAWINGS