Proper Hose Grounding
When connecting the hose lines to the individual connection pipes,
ensure there is proper grounding throughout the line!
Expose approximately 1¼” (3 cm) of the earth conductor at
the end of the hose line.
TIP: Slit the insulation open along the wire with a knife.
Bend the earth wire inwards in a loop
This prevents the earth wire from being damaged by the
feed of pellets.
Fit a hose clip to the hose line
Attach the hose line to the connector
Ensure that contact is established between the earth conductor
and the connector!
Tighten the hose clip
To Next Page
Loading...
