Technology
Components, Connections, and Dimensions
Page 16
M0930207 I
❒ Position a fork-lift or similar lifting device using the pallet and bring in the
boiler.
If the boiler cannot be brought in on the pallet:
❒ Remove the cardboard and remove the boiler from the pallet
⇨ See "Remove boiler from pallet" [page 17]
If you need to dismantle the boiler to bring it in:
❒ Dismantle the components of the boiler until it can be brought in
⇨ See "Dismantling for location where positioning is difficult" [page 19]
Positioning using a crane:
❒ Remove the insulating cover, heat exchanger cover(s) and combustion
chamber cover(s).
❒ Correctly attach the crane hook to the attachment point for lifting
(underneath the cover) and position the boiler.
3.1.2 Temporary storage
If the system is to be installed at a later time:
Store the boiler, insulation and control unit in a safe, dust-free, and
dry location.
Moisture and frost reduce the effectiveness of insulation and can
destroy electronic components.
To Next Page
Loading...
