Fronius Calibration system 2.0 - Required for Calibration

Required for calibration
Computer &
software
-
Computer, laptop
-
Calibration software
The calibration software can be downloaded from:
https://downloadcenter.myfronius.com
Software/Firmware
Firmware
„Calibration“
Fronius internal:
https://collaboration.fronius.com
Collaboration Perfect Welding / Products & Services PW
General Topics / Services
Securing Services
Categories / Calibration
04_cal_software_releases
Hardware & ac-
cessories
-
Calibration system 2.0
-
Interface calibration system
-
Welding wire calibration system
-
Accessories calibration system
-
Trolley calibration system
Required for cal-
ibration of the
WeldCube Con-
nector
For the calibration of WeldCube Connector U/I and WeldCube Connector Ad-
vanced:
-
PoE injector, RJ45 30 W / 802.3at / PoE+ (42,0411,0213)
-
M12-X / RJ45 network cable, 5 m (42.0411.0232)
-
TPS 500i power source
For the calibration of WeldCube Connector U/I/WFS WSM and WeldCube Con-
nector Advanced + WSM:
-
PoE injector, RJ45 30 W / 802.3at / PoE+ (42,0411,0213)
-
M12-X / RJ45 network cable, 5 m (42.0411.0232)
-
Existing TransSteel system components
-
70/95 DIX KAB socket splitter (43,0003,0704)
20