7
Depending on the operating system, select the subfolder (win / win_64) and
follow the instructions
After successful installation, the driver can be found under the network ad-
apters:
Microsoft Virtual WiFi Miniport Adapter
Network adapters
8
If a driver is already installed,
ensure that it is the latest version and if necessary update it
Also use the connected USB port for future work with the calibration system.
TPS/i Smart-
Card driver
NOTE!
The TPS/i SmartCard driver is already installed in Windows® 10.
1
Open the path:
\WT_SW_Fronius_CalibrationSystem2.0_vX.X.XX.X_MULTI\driver\OMNIKEY
\
2
Depending on the operating system, select the subfolder, install the file loc-
ated there and follow the instructions
Win7 / Win8:
Successful installation will be displayed in the Device Manager as follows:
OMNIKEY 6121
Smart card readers
NOTE!
If several SmartCard readers appear in the Device Manager, select the correct
one:
1
Right-click on the existing SmartCard reader and select "Properties"
Under General / Storage location, a port is specified
e.g..:
Port_#0002.Hub_#0002
This device must be activated!
If under Properties / General / Storage location NO port is specified for a Smart-
Card reader, it must be deactivated:
1
Right-click on the affected SmartCard reader and select "Disable Device"
32
To Next Page
Loading...
Need help?
General