Fronius Calibration system 2.0 - Language and System Information

Setting the language, system information
Setting the lan-
guage
After the calibration software has been installed, the language can be set for the
user interface:
The system switches to the chosen language when the program is restarted.
NOTE!
Only the user interface of the calibration software is displayed in the chosen
language. The language for the calibration report must be set separately!
Retrieving sys-
tem information
Clicking on the ? displays the following
system information:
-
Software version of the calibration
software installed
-
Software version of the Beckhoff
elements installed in the calibra-
tion system
37
EN