Fronius Calibration system 2.0 User Manual

Setting the language 37
Retrieving system information 37
Calibrating welding systems 39
General information 41
Mains voltage measurement for single-phase power sources 41
Correcting set values and load resistances 41
Calibrating welding systems with LocalNet (TPS, TSt, MW, TT) 42
Overview - LocalNet 42
Connecting the power source and calibration system 42
Connecting the welding wire calibration system 45
Connecting the computer to the calibration system and signature pad 46
Preparing the gas calibration system 48
Calibrating the welding system 49
Calibrating welding systems with SpeedNet (TPS /i, iWave 300i - 500i) 53
Overview - SpeedNet 53
Connecting the power source and calibration system 53
Connecting the welding wire calibration system 53
Connecting the computer to the calibration system and signature pad 54
Preparing the gas calibration system 54
Calibrating the welding system 55
Calibrating welding systems with USB / SpeedNet 59
Overview - USB 59
Connecting the power source and calibration system 59
Connecting the welding wire calibration system 60
Connecting the computer to the calibration system and signature pad 60
Preparing the gas calibration system 60
Calibrating the welding system 61
Calibrating other Fronius welding systems 65
Overview - other Fronius devices 65
Connecting the power source and calibration system 65
Connecting the welding wire calibration system 66
Connecting the computer to the calibration system and signature pad 66
Preparing the gas calibration system 66
Calibrating the TransPocket welding system 67
Calibrating TransTig 1750 Puls 70
Calibrating VarioSynergic 3400 74
Calibrating TransTig 170 / 210 78
Calibrating WeldCube Connector 82
Overview 82
Connecting the TPS /i power source, WeldCube Connector and calibration system 82
Connecting the welding wire calibration system 84
Connecting the computer to the calibration system and signature pad 84
Preparing the gas calibration system 84
Calibrating WeldCube Connector 85
Troubleshooting 91
Troubleshooting 93
The status indicator is not lit up 93
The status indicator lights up red 93
No connection 93
No USB/SpeedNet connection 94
Technical data 95
Technical data 97
Calibration system 2.0 97
Wire speed measuring system 97
Interface box 98
Gas measurement option 98
4

Fronius Calibration system 2.0 Specifications

General

Brand	Fronius
Model	Calibration system 2.0
Category	Test Equipment
Language	English