47
EN
Warning notices
on the device
The device is fitted with safety symbols and a rating plate. The safety symbols and rating
plate must not be removed or painted over. The safety symbols warn against operating the
equipment incorrectly, as this may result in serious injury and damage.
Example: WF 30i REEL R /2R/G/W
Do not dispose of used devices with domestic waste. Dispose of them according to the
safety rules.
Welding is dangerous. The following basic requirements must be met to ensure the equip-
ment is used properly:
- Anyone performing automated welding must be sufficiently qualified
- Suitable protective equipment must be used
- All persons not involved must be kept at a safe distance from the wirefeeder and the
welding process
Do not use the functions described here until you have fully read and understood the fol-
lowing documents:
- These Operating Instructions
- All the Operating Instructions for the system components, especially the safety rules
To Next Page
Loading...
