Fronius MIG/MAG - Splitbox SB 60 I R; Device Concept; Proper Use; Safety

52
SplitBox SB 60i R
Device concept The SB 60i R and SB 60i R /L are devices for bringing together the welding media in auto-
mated MIG/MAG welding and are specially designed for mounting on robots.
SB 60i R:
Right version of the appliance, for fitting to the right side of the robot
SB 60i R /L:
Left version of the appliance, for fitting to the left side of the robot
Proper use The device is designed exclusively for bringing together the welding media in automated
MIG/MAG welding applications in conjunction with Fronius system components. Any use
above and beyond this purpose is deemed improper. The manufacturer shall not be held
liable for any damage arising from such usage.
Utilisation in accordance with the intended purpose also comprises:
- carefully reading these operating instructions
- following all the instructions and safety rules in these operating instructions
- performing all the stipulated inspection and maintenance work
Safety
WARNING!
Danger due to incorrect operation and incorrectly performed work.
This can result in severe personal injury and damage to property.
► All the functions described may only be used by trained and qualified personnel.
► Fully read and understand this document.
► Fully read and understand all the Operating Instructions for the system components,
especially the safety rules.