Fronius MIG/MAG - Fitting the Hosepack to the WF Robacta Drive (Conventional)

93
EN
Fitting the hose-
pack to the WF
Robacta Drive
(conventional)
IMPORTANT! Only fit the drive unit when the power source is switched off.
CAUTION!
Danger of property damage due to dirty or wet coupling point.
► Whenever the hosepack is fitted or removed, ensure that the coupling point is clean
and dry.
► Remove any coolant that has escaped from the coupling point.
1 2
3 4
1
2
42,0411,1315
45,0200,1261
3
4