Fronius MIG/MAG - Fitting the Splitbox; Fitting the Wirefeeder Holder; Fitting the SB 500 I R; Fitting the SB 500 I R (Left Variant)

85
EN
Fitting the SplitBox
Fitting the wire-
feeder holder
NOTE!
Depending on the robot, please also note the instructions and information on install-
ing the wirefeeder in the User Information.
Fitting the SB
500i R
1 2
* = 2x M8 x 20 mm
Fitting the SB
500i R (left vari-
ant)
1 2
* = 2x M8 x 20 mm
7x
M6x16
6x
6FSt
6FSt
1x
1x
M6x16
1
2
7x
M6x16
6x
6FSt
6FSt
1x
1x
M6x16
1
2