Fuji Electric RYS...S3-VVS Series - Page 15

MHT258a (Engl.)2-5
(2) Slim type motor (0.03 to 5 [kW]) for 200 [V] class input voltage of amplifier
(a) Basic design
(i) 0.03 to 0.75 [kW]
Type GYS□□□DC1-S 300 500 101 201 401 751
Rated output [kW] 0.03 0.05 0.1 0.2 0.4 0.75
Rated torque (*4) [N•m] 0.095 0.159 0.318 0.637 1.27 2.39
Rated 3000Speed [r/min]
Max. 5000
Breakdown (max.) torque (*3) [N•m] − 0.478 0.955 1.91/2.87 3.82/5.73 7.17/10.7
Moment of inertia of motor rotor (×10
-3
)J[kg•m
2
] − 0.0034 0.00517 0.0137 0.0249 0.0861
Rated − 0.93 0.9 1.5 2.6 4.8Current [A]
Max. (*3) − 2.8 2.7 4.5/6.8 7.8/11.8 14.4/21.6
Winding insulation class B
Operation duty type Continuous
Degree of enclosure protection Totally enclosed, IP55 except for shaft sealing
Motor power
Electrical connection
terminals
Encoder detector
With 0.3 m flexible leads and connectors
Temp. detection Without providing
Type of construction (mounting) IMB5, IMV1, IMV3, flange-mounted
Shaft extension Cylindrical extension with key
Final color for external non-machined surface Munsell N1.5
Encoder detector 16-bit serial encoder
Vibration level, peak to peak amplitude 5 micrometers
Install location For indoors, 1000[m] and below of site-altitude
Ambient climatic conditions Temperature : −10 to +40 [°C], humidity : 90 [%] RH max. (free from condensation)
Acceleration vibration, acceptable (max.) 4.9 [m/s
2
]
Mass (weight) [kg] − 0.45 0.55 1.2 1.8 3.4
(b) Additional data for motor with providing brake
(i) 0.03 to 0.75 [kW]
Type GYS□□□DC1-S-B 300 500 101 201 401 751
Rated output [kW] 0.03 0.05 0.1 0.2 0.4 0.75
Rated torque [N•m] 0.095 0.159 0.318 0.637 1.27 2.39
Braking torque [N•m] 0.34 0.34 0.34 1.27 1.27 2.45
Rated voltage DC [V] 24
Attraction time [ms] − 35 35 40 40 60
Release time [ms] − 10 10 20 20 25
Brake input [W] − 6.1 6.1 7.3 7.3 8.5
Mass (weight) [kg] − 0.62 0.72 1.7 2.3 4.2