Fuji Xerox DocuCentre-IV 2060 Administrator's Guide

15 Problem Solving
474
Problem Solving
15
061-320
061-325
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is displayed again,
contact our Customer Support Center.
062-277
[Cause] A communication error occurred between the document scanning unit and
the document feeder.
[Remedy] Contact our Customer Support Center.
062-311
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is displayed again,
contact our Customer Support Center.
062-345
062-360
062-362
062-371
062-380
062-386
062-389
062-393
062-395
062-396
062-397
062-398
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and
then switch on the machine power. If the same message is displayed again,
contact our Customer Support Center.
062-790
[Cause] Copying of the scanned document is prohibited.
[Remedy] Refer to "1 Before Using the Machine" > "Legal Notice" in the User Guide.
071-210
[Cause] Tray 1 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the
machine power, make sure that the touch screen is blank, and then switch on
the machine power. If the error still is not resolved, contact our Customer
Support Center. You can use a tray other than Tray 1.
071-212
[Cause] Tray 1 malfunction
[Remedy] Execute the operation again.
072-210
[Cause] Tray 2 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the
machine power, make sure that the touch screen is blank, and then switch on
the machine power. If the error still is not resolved, contact our Customer
Support Center. You can use a tray other than Tray 2.
072-212
[Cause] Tray 2 malfunctioned
[Remedy] Contact our Customer Support Center. You can use a tray other than Tray 2.
073-210
[Cause] Tray 3 malfunction
[Remedy] Confirm the paper loading condition for the Tray, and then switch off the
machine power, make sure that the touch screen is blank, and then switch on
the machine power. If the error still is not resolved, contact our Customer
Support Center. You can use a tray other than Tray 3.
073-212
[Cause] Tray 3 malfunction
[Remedy] Contact our Customer Support Center. You can use a tray other than Tray 3.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.
Downloaded From ManualsPrinter.com Manuals

Fuji Xerox DocuCentre-IV 2060 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-IV 2060
Category	All in One Printer
Language	English