Faxing 177
Loading an Original Document on the Document Glass
1 Open the document cover.
2 Place the document facing down on the document glass and align it with the registration guide on the top left
corner of the document glass.
3 Adjust the document resolution, referring to "Resolution" on page 178.
4 Close the document cover.
NOTE:
• Make sure that no document is in the ADF. If any document is detected in the ADF, it takes priority over the document on the
document glass.
• If you are faxing a page from a book or magazine, lift the document cover until its hinges are caught by the stopper and then
close the document cover. If the book or magazine is thicker than 20 mm, start faxing with the document cover open.
• Do not apply excessive force to hold thick document on the document glass. It may break the glass and cause
injuries.
To Next Page
Loading...
