Using the Operator Panel Menus and Keypad 241
• Original Type
Purpose:
To select the copy image quality.
Values:
• Lighten / Darken
Purpose:
To set the default copy density level.
Values:
• Sharpness
Purpose:
To set the default sharpness level.
Values:
• Auto Background Suppression
Purpose:
To suppress the background of the original to enhance text on the scanned image.
Values:
• Color Balance
Color Balance
Purpose:
To specify the default color balance level within the range of -3 to +3.
Values:
Photo & Text* Suitable for documents with both text and photos/gray tones.
Text Suitable for documents with text.
Photo Suitable for documents with photos.
Lighten2 Makes the copy lighter than the original. Works well with dark print.
Lighten1
Normal* Works well with standard type or printed documents.
Darken1 Makes the copy darker than the original. Works well with light print or faint pencil
markings.
Darken2
Sharpen2 Makes the scanned image sharper than the original.
Sharpen1
Normal* Does not make the scanned image sharper or softer than the original.
Soften1 Makes the scanned image softer than the original.
Soften2
Off Does not suppress the background.
On* Suppresses the background of the original to enhance text on the scanned image.
Red -3 to +3 Sets the color balance level of density red.
Green -3 to +3 Sets the color balance level of density green.
Blue -3 to +3 Sets the color balance level of density blue.
To Next Page
Loading...
Need help?
General
