Fuji Xerox DocuPrint CM225FW

282 Troubleshooting
 The Entire Output Is Blank
If this trouble happens, contact the Fuji Xerox local representative office or an authorized dealer.
 Streaks Appear on the Output
If this trouble happens, contact the Fuji Xerox local representative office or an authorized dealer.
 Pitched Color Dots
If this trouble happens, contact the Fuji Xerox local representative office or an authorized dealer.
 Vertical Blanks
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji Xerox local
representative office or an authorized dealer.
Problem Action
The printed result has vertical blanks. Clean inside the printer and perform a test print.
1 Clean inside the printer by using the print head cleaning rod.
2 Click Print Test Page in the Properties window of the print driver.
See also:
• "Cleaning Inside the Printer" on page 320