178 Faxing
Lighten / Darken
To adjust the contrast to make the fax lighter or darker than the original:
1 Press the (Services Home) button.
2 Select Fax.
3 Select Lighten / Darken.
4 Select the desired setting, and then select OK.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
Resolution
To specify the resolution level to be used for fax transmission:
1 Press the (Services Home) button.
2 Select Fax.
3 Select Resolution.
4 Select the desired setting, and then select OK.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
NOTE:
• Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the receiving device.
Lighten2 Makes the fax lighter than the original. Works well with dark print.
Lighten1
Normal * Works well with normal typed or printed documents.
Darken1 Makes the fax darker than the original. Works well with light print or faint pencil
markings.
Darken2
Standard * Suitable for documents with normal sized characters.
Fine Suitable for documents containing small characters or thin lines or documents
printed using a dot-matrix printer.
Super Fine Suitable for documents containing extremely fine detail. The Super Fine mode
is enabled only if the remote machine also supports the super fine resolution.
Ultra Fine Suitable for documents containing photographic images.