238 Using the Operator Panel Menus and Keypad
Values:
• Software Download
Purpose:
To enable or disable download of firmware updates.
Values:
• Display of Network Information
Purpose:
To show or hide network information in the message field of the top service menu screen.
Values:
• Login Attempts
NOTE:
• Login Attempts feature is available only when Panel Lock Set is set to Enable.
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator in the Admin Settings
and Report / List menu.
Values:
USB Setup
Use the USB Settings menu to change printer settings affecting a USB port.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
• Port Status
Purpose:
To enable or disable the USB interface.
Values:
Disable* Disables Domain Filtering.
Enable Only allows e-mails to be sent to specified domains.
Disable Disables firmware updates.
Enable* Enables firmware updates.
Show IPv4 Address* Shows the IPv4 address of the printer.
Show Host Name Shows the host name of the printer.
Hide Network Information Does not show network information.
Off* Does not allow an administrator to log in after one error entry attempt.
On 5* Sets the number of error entry attempts allowed when an administrator logs in.
1-10
Disable Disables the USB interface.
Enable* Enables the USB interface.
To Next Page
Loading...
