Using the Operator Panel Menus and Keypad 251
Disabling the Panel Lock
NOTE:
• You can select Disable for Panel Lock Set when all items under Service Lock are set to Unlocked and Secure
Receive Set is set to Disable.
1 Press the (System) button.
2 Select the Tools tab.
3 Select Admin Settings.
4 Enter the new passcode, and then select OK.
5 Select Secure Settings.
6 Select Panel Lock.
7 Select Panel Lock Set.
8 Select Disable, and then select OK.
9 Enter the current passcode, and then select OK.
To Next Page
Loading...
