30 Basic Operation
Turning On/Off the Printer
Turning On Your Printer
IMPORTANT:
• Do not use extension cords or power strips.
• The printer should not be connected to an uninterruptible power supply (UPS) system.
1 Connect the power cord to the power connector on the rear of your printer (see "Rear View" on page 26).
2 Connect the other end of the cord to the power source.
3 Turn on the printer.
NOTE:
• When you turn on the printer for the first time, follow the on-screen instructions on the touch panel to configure the initial
settings of your printer.
See also:
• "Setting Initial Settings on the Operator Panel" on page 32
To Next Page
Loading...
