230 Using the Operator Panel Menus and Keypad
Off Hook Wake Up
Purpose:
To specify whether to wake up from the low power or sleep mode when you pick up the handset of the external
telephone.
Values:
RAM Disk
Purpose:
To allocate memory to the RAM disk file system for the Secure Print features. The change becomes effective after
the printer is turned off and then on again.
Values:
NOTE:
• Restart your printer when you change the settings for the RAM Disk menu.
Fax Server Address Book
Purpose:
To specify whether to search the phone numbers from the Address Book for the LDAP server.
Values:
NOTE:
• You can search the phone numbers only from the local Address Book when Fax Server Address Book is set to Off.
E-mail Server Address Book
Purpose:
To specify whether to search the e-mail addresses from the Address Book for the LDAP server.
Values:
NOTE:
• You can search the e-mail addresses only from the local Address Book when E-mail Server Address Book is set to
Off.
Off Does not wake up from the low power or sleep mode when you pick up the
handset of the external telephone.
On* Wakes up from the low power or sleep mode when you pick up the handset of the
external telephone.
Off Does not allocate memory to the RAM disk file system. Secure Print jobs will abort
and be recorded to the job log.
On* 40 MB* Sets the allocation of memory to the RAM disk file system in increments of 40 MB.
40–80 MB
Off* Does not search the phone numbers from the Address Book for the LDAP server.
On Searches the phone numbers from the Address Book for the LDAP server.
Off* Does not search the e-mail addresses from the Address Book for the LDAP
server.
On Searches the e-mail addresses from the Address Book for the LDAP server.
To Next Page
Loading...
Need help?
General
