250 Using the Operator Panel Menus and Keypad
Panel Lock Function
When your printer is configured as a network printer available to a number of users, the access to Admin
Settings and Report / List can be limited by enabling the Panel Lock function. This prevents unauthorized
users from changing the settings made by the administrator. However, you can select settings for individual print
jobs using the print driver.
Enabling the Panel Lock
1 Press the (System) button.
2 Select the Tools tab.
3 Select Admin Settings.
4 Select Secure Settings.
5 Select Panel Lock.
6 Select Panel Lock Set.
7 Select Enable, and then select OK.
8 Enter the new passcode, and then select OK.
9 Re-enter the passcode to confirm the passcode that you entered, and then select OK.
NOTE:
• Be sure to remember the password. The procedure described below allows you to reset the password. However, the settings
for the Address Book would be cleared.
1 Turn off the printer.
2 Turn on the printer with holding the (System) button.
Changing the Panel Lock Password
1 Press the (System) button.
2 Select the Tools tab.
3 Select Admin Settings.
4 Select Secure Settings.
5 Select Panel Lock.
6 Select Change Password.
7 Enter the current passcode, and then select OK.
8 Enter the new passcode, and then select OK.
9 Re-enter the passcode to confirm the passcode that you entered, and then select OK.
To Next Page
Loading...
Need help?
General
