Using the Operator Panel Menus and Keypad 209
*
1
The default for Paper Size varies depending on region-specific factory.
NOTE:
• Selecting Custom Size for the paper size prompts you to enter a custom length and width.
•Orientation
Purpose:
To specify how text and graphics are oriented on the page.
Values:
Custom Size Width(x) 8.3 inch*
3.0 – 8.5 mm
Specifies the length of the custom size paper.
Length(y) 11.7 inch*
5.0 – 14.0 mm
Specifies the length of the custom size paper.
Portrait* Prints text and graphics parallel to the short edge of the paper.
Landscape Prints text and graphics parallel to the long edge of the paper.
To Next Page
Loading...
