Name: Fuji Xerox DocuPrint CM225FW
Brand: Fuji Xerox
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Printing Basics 99

To prevent DL and Monarch from being wrinkled, they are recommended to be loaded with the flaps opened. Place

the print side facing up, and the flaps come at the bottom when you face towards the printer.

NOTE:

• When you load the envelopes in the long-edge feed (LEF) orientation, be sure to specify the landscape orientation on the print

driver.

• When Loading C5

Load envelopes with the flaps opened. Place the print side facing up, and the flaps come at the bottom when you

face towards the printer.

IMPORTANT:

• Never use envelopes with windows, or coated linings. These lead to paper jams and can cause damage to the printer.

NOTE:

• Up to 5 envelopes can be loaded in the standard 150 sheet tray.

• If you do not load envelopes in the standard 150 sheet tray right after they have been removed from the packaging, they may

bulge. To avoid jams, flatten the envelopes before loading them in the standard 150 sheet tray. When flattening the envelopes,

firmly press down on the entire surface of the envelopes as shown below.

Feed direction

Questions and Answers:

Need help?

Do you have a question about the Fuji Xerox DocuPrint CM225FW and is the answer not in the manual?

Fuji Xerox DocuPrint CM225FW Specifications

General