Fujitsu DL7600Pro - Setup Mode Example (LED)

USING SETUP MODE
User's Manual 5-7
Setup Mode Example (LED)
To become familiar with setup mode, try the following example. This
example shows how to change the font and pitch in MENU2 to Prestige
Elite 12 and 12 cpi.
1. Load continuous forms paper.
2. Enter setup mode.
Press the SETUP button until the printer beeps.
3. Select the MENU2 function.
Wait for the printer to stop printing and press the “TEAR OFF”
or “LOAD” button twice to position the cursor on the left edge
of the aluminum print guide at MENU2. Press the “” button
or the “” button to select the MENU2 function and print the
<EMULATE> item and its options.