TROUBLE-SHOOTING
7-12 User's Manual
Responses to alarm occurrences
Your first response to each alarm should be as described in the following
table.
Problem Solution
LRES alarm Remove any paper dust, which may cause problems
in carriage operation.
Space problem
alarm
Same solution same as above should be done.
Check adjustment for paper thickness.
Smaller setting causes spacing problem.
Fan alarm Remove any dust of ventilation near the Fan motor.
APTC gap
alarm
Check the paper thickness (0.04 to 0.65 mm).
Check whether the paper has different thicknesses
or whether the paper has filing holes.
For problems other than the above, request your printer dealer to make
repairs.
To Next Page
Loading...
